Protect-Air is an innovative project launched to address the urgent need to reduce pollution caused by air transportation. The main objective is to develop a new material that can replace current technology with one that offers a better balance between conductivity...

CT, a leading engineering company specializing in technological innovation throughout the product life cycle, is spearheading the European project CLAH2RENH3CE, supported by the Ministry of Science and Innovation and funded by the CDTI. This project aims to implement...

The Gavilanso project focuses on the safe, sustainable, and efficient integration of unmanned aircraft and eVTOL in urban environments.
CT Engineering is involved in the creation of virtual flight simulators for light aerial platforms and predictive digital twins of their batteries, allowing for mission testing and optimization before undertaking real flights.

CT has spearheaded the development and implementation of the ALARAD platform, integrating cutting-edge technologies to enhance the management and quality of agricultural production in Ribera del Duero vineyards. The project combines IoT technologies, artificial...

CT is part of the ADAPTA R&D project, working on factory virtualization through MBSE, developing a digital twin to enable agile reconfiguration of production processes and optimize efficiency in mass customization. The model is designed to increase the...

CT joins the multidisciplinary TIFON consortium, a pioneering project aimed at optimizing design, manufacturing and operational processes in the aeronautics sector through the use of artificial intelligence (AI). CT is focused on developing AI-based solutions to...

CT has been selected to develop and implement the SCADA (Supervisory Control and Data Acquisition) system for the new Renopool solar farm, one of the most significant renewable energy initiatives driven by Plenitude. The farm, located in Badajoz, Extremadura, will...

After three years of research, the 3DELECPRINT R&D project, led by CT in collaboration with Eurecat and AXTER, has successfully developed a flexible robotic platform integrated for printing electronic sensors and/or wiring on complex rigid 3D geometries. The final...

CT, in collaboration with Airbus Defence & Space and other key industry partners, announces the launch of the CETACEO project, an ambitious programme aimed at revolutionising the aviation industry through the development of net-zero emissions transport aircraft....

CT is leading the ambitious European R+D project CLAH2RENH3CE, a consortium formed alongside SOFITEC, INDAERO GRUPO EMERGY SL, and Edair Technologies, dedicated to developing an innovative hydrogen and ammonia storage and distribution system for aircraft. This project...

In the competitive and regulatory-compliant landscape of industrial tank manufacturing, Tankeros faced a significant challenge. The existing calculations for their tank models were scattered across various files, each handled by different analysts over the years. This...

CT, in collaboration with NODOSA shipyards and the University of Vigo, is participating in the design of a harbour tugboat fully propelled by green hydrogen. The H2TECH4SHIP project is being conducted under the auspices of Navantia’s lead project, INNCODIS, as part of...

The objective of the ONEIRE project -OPTIMUM NEXT GENERATION AIRCRAFT & INTEGRATED REAR END- was to delve into the early design phases of the new generation of hydrogen-powered aircraft with low to zero emissions. The project concentrated on four key areas:...

Plastic waste is suffocating our oceans, with eight million metric tons entering the waters each year—equivalent to a garbage truck’s load every minute. This crisis spans from the ocean depths to human health, as plastics infiltrate the entire food chain. Using river...

In a groundbreaking collaboration, CT is at the forefront of revolutionizing industrial processes with the launch of ImaginA project. This initiative marks a significant progress in applying state-of-the-art artificial intelligence (AI) and computer vision technology...

CT is making progress with the IADGENOL R&D project aimed at researching Deep Learning models for the automatic control and characterisation of AWE (Airborne Wind Energy) systems for wind energy generation, forming part of the framework of the Red.es call for...

CT, from its delegation in Bilbao, leads the Basque R&D initiative ADDHOC, which will develop a new family of digital tools, CAx, to introduce new metallic additive technologies in industrial sectors with mechanical, short series and highly customized...

Around the world, various small space launcher initiatives have emerged to provide more affordable and flexible satellite launch services. These initiatives have become possible due to the miniaturization of components and a shift toward smaller, resilient satellite...

CT is part of a group of multi-disciplinary organizations and companies, which have joined together to drive the optimization of product traceability and management of land logistics routes using artificial vision and data science. The project is coordinated by...

WELDER Consortium members Le projet WELDER de Clean Sky 2 a livré et mis en service avec succès les têtes de soudage par ultrasons et par résistance. Les deux nouvelles solutions de soudage remplaceront les systèmes d’assemblage conventionnels reposant sur la...

This software will be designed for highly intensive assembly processes in the aeronautical, automotive and rail sectors. CT will simulate and model in 3D the process to optimize assemblies. CT has initiated the R&D project VAREAL which will develop a new platform...

Key points CT will announce the construction of the INSIDeR ground demonstrator, and the set-up of an industrial consortium, as well as the seeking of the necessary financing for the flight demonstration stage. A prototype is expected to be placed in orbit by the end...

Wind Farm, Vestas Our teams supervised the detailed engineering, executed by a third party, of the Ventus Wind Farm, located in El Salvador. Several CT teams specialising in the different fields required in the wind farm and the feed-in substation participated in the...

Red Eléctrica Española For two decades, our specialists have been working with different companies on the execution of comprehensive protection and control engineering, as well as electromechanical assembly for the end customer Red Eléctrica de España (REE). During...

The International Thermonuclear Experimental Reactor (ITER), one of the most ambitious energy projects in the world today, placed at Cadarache in south-eastern France, is a globe-spanning collaboration of 35 nations (the ITER Members are China, the European Union,...

Hydroelectric plant, Villarino Our team participated in the rehabilitation process that Iberdrola carried out for the first time for two of the three low-pressure valves of the Villarino de los Aires hydroelectric plant (Salamanca), an installation on the Tormes...

g3 gas-insulated substation at Denmark’s Cerius (Photo: Business Wire) GAS-INSULATED SUBSTATIONS Our team has prepared the detailed engineering for the protection and control for substations with General Electric’s Gas Insulated Switchgear (GIS). We have extensive...

CT’s work team, with more than 20 years of experience, brings its knowledge and experience with leading national and international customers in the expansion, renovation and development of all new high voltage electrical substations, regardless of their type –...

Image provided by Navantia. CT has invested 200,000 engineering hours in developing the S-80 Plus Submarine. Currently, as well as providing engineering support, CT is in charge of managing production and is key in various areas of supporting the S-80 Program...

Deutsche Bahn ICE 3 train stopping at platform Hauptbahnhof Central Station. Germany, Frankfurt am Main. Source: aapsky – stock.abobe.com Germany is in the process of decarbonising its means of transport and its long-distance train network is being developed based on...

Talgo Avril interior. Source: Talgo CT has participated actively in the engineering and interior design of the next generation of Spanish high-speed trains –AVE-, known as Talgo Avril. A high-capacity, high-speed train that not only transports the largest number of...

Since 2016, we have been working with Talgo to develop machinery to maintain rolling stock, such as pit lathes (CNC machines that profile the wheels without having to disassemble the train axles), measuring equipment (which make it possible to detect any anomalies in...

SABIC is one of the world’s largest chemical producers, in particular in its Cartagena plant, where it produces high-performance plastics for its customers worldwide. For several years, CT has been working with SABIC to ensure the proper maintenance of its Cartagena...

Eutelsat 36D. Source: Airbus Media Center We have been selected by Airbus to work on its next program, requested by Eutelsat, one of the world’s leading satellites operators. EUTELSAT 36D is a key multi-mission geostationary telecommunications satellite for TV...

The Royal Australian Navy’s new logistic supply vessels are among the largest naval projects ever to be undertaken by CT. We have been involved in the project from the outset, not only working from Narón’s offices (A Coruña), but also transferring personnel to the...

Two years later since the launch of the Andromeda R&D project, the consortium made up of CT, Delaser (project leader) and AIMEN (collaborating entity) has taken large steps toward completing the project’s mission: to develop a flexible and holistic solution for...

ADDSET, an R&D project led by CT, in collaboration with the EURECAT Center and financed by ACCIÓ through its NUCLIS program, has completed its first trials successfully.After more than a year of development, ADDSET has moved closer to its objective of improving...

CT will carry out research and development on a predictive algorithm capable of optimizing the various factors that affect the wellbeing and productivity of employees using data provided by an IoT system.This comprehensive proposal includes various objectives such as...

CT lance KIRIBATI, un projet de R et D dont l’objectif final est de développer une plateforme logicielle intelligente pour concevoir des moteurs à flux axial et des systèmes de traction électrique.Le développement de la plateforme intelligente KIRIBATI représentera...

The KEELBEMAN project successfully concluded at the end of February 2020. Funded by the European Commission through the Clean Sky 2 Joint Undertaking under the EU Horizon2020 program, the goal of this project was the complete design and manufacture of a thermoplastic...

After three years of research and development, CT has successfully concluded the DITIPO project, an R&D initiative whose objective is to monitor the condition of orange groves by applying multispectral technology installed in drones.During the last phase of the...

Over the next two years, CT will be involved in the ESCAPE R&D project, whose goal is to design and develop an innovative system for lightweight, automated roof windows for ventilation and rescue.This is a universal solution, since it can be used in any model of...

The system developed by a team of CT engineers consists of an automated guided vehicle (AGV) capable of moving through the aircraft cabin to disinfect all its elements, using short distance UV light type C radiation. The main advantages of FlightSafe include its...

CT joins the RETPAIR project starting January this year with the aim of developing new high-performance, flexible and cost-effective, automated and robotized net-shape technologies to rework and repair TPC parts to be integrated in the manufacturing line. RETPAIR is...

CT, from its delegation in Bilbao, leads the Basque R&D initiative ADDHOC, which will develop a new family of digital tools, CAx, to introduce new metallic additive technologies in industrial sectors with mechanical, short series and highly customized...

The R&D project Plug & Play is financed by the NUCLIS grant with funds from FEDER 2016.This project aims to provide solutions in the implementation of a welder for automotive industrialization. CT is working on the R&D project Plug & Play which aims to...

The project aims to improve employability in the sector by developing strategies for digitalization, green technologies, education and training. The project, which is financed by the European Commission with €4m, is participated by universities, technological centers...

The Flow Project aims to develop a floating wind turbine for a life size demonstration to overcome restrictions for the construction of offshore windfarms in areas of a depth greater than 60mts. CT is part of a project led by Nautilus and includes Iberdrola,...

CT moves forward with its strategic R&D project Papua, approaching precision farming, which allows monitoring the crops conditions in representative time. One year later, the initiative has already its own a web application, which allows farmers to manage their...

C295 displayed at the ILA Berlin air show ©COPYRIGHT Airbus_2022_Schwarzbild Over the last decade, we have been working in Part-145 aeronautical maintenance centers in both civil and military fields (EASA / PERAM), with a specific training plan in aeronautical...

A330 AIB in maintenance – hangar repair. Source: Airbus Media Center CT ensures the operational readiness of aircraft by guaranteeing compliance with all requirements for safe, inexpensive and competitive operations during the development, design and life cycle of...

A320 Family Final Assembly in Hamburg. Source: AIRBUS Electrical system installation design is one of the core activities we have been providing to Airbus and Airbus DS for more than ten years in different programs, including the C295, A330MRTT, A400M and A350XWB. We...

We produce technical documentation for an entire fleet of aircraft, integrating information from the different manuals that make up these publications. This includes information related to new aircraft and also to aircraft already in service that require further...

NH90 Finnish Armed Forces. Source: Airbus Copyritgh: Puolustusvoimat We have helped define the primary and secondary structures of their most important programs, NH90 and TIGER, and customized several helicopters, including the H135. Structural Design modification of...

In order to help our customers more efficiently manage their fleets, CT has developed one of the most immersive and cost reducing tools available in the market. We can help you to reduce time and costs spent on training and better maintain your fleet, by giving you...

MRTT Refuelling A400M. Source: Airbus Media Center The Airbus A330 Multi Role Tanker Transport (MRTT) is an aerial refueling tanker aircraft based on the civilian Airbus A330. Since 2009, CT has been supporting Airbus DS in manufacturing engineering activities related...

A400M MRO ©COPYRIGHT Pablo_Cabellos The Airbus A400M is a European four-engine turboprop military transport aircraft. It was designed by Airbus Defence and Space as a tactical airlifter with strategic capabilities to replace older transport aircraft, such as the...

A350-1000 British Airways MSN326 FAL start. Ⓒ Airbus SAS 2019 Philippe Masclet – Master Films CT has been providing engineering services for the A350 XWB S-19 since 2014. Thanks to our long experience we have become highly specialized in the 900 and 1000 versions and...

AIRBUS formation ©COPYRIGHT AIRBUS-S.RAMADIER: The A400M Integration Simulator is a key tool in the verification & validation process. The test bench is connected to a large amount of real equipment to ensure the authenticity required for a number of tests such...

"The largest exploration rig for ocean research and production of multimedia contents that has ever sailed" (James Cameron) The <a href="https://oceanx.org/oceanxplorer">OceanXplorer</a>, born from the conversion of a former oilrig supply vessel (PSV) at...

AlMostakshif. Source: Freireshipyard In recent years, CT has taken part in developing the engineering for several oceanographic vessels, including the AlMostakshif, constructed by the Freire Shipyard in the Vigo Ria for the State of Kuwait. In this project, CT was...

VOX Amalia and her sister ship VOX Alexia, are two of the latest additions to Van Oord’s fleet, that firm being one of the world leaders in the dredging business, offshore activities (Oil & Gas) and offshore wind power; the firm employs more than 4,500 people and...

The largest ship ever built for the Royal Australian Navy, Landing Helicopter Dock NUSHIP Adelaide, passes through Sydney Heads for the first time. The Australian Landing Helicopter Dock (ALHD) vessels, which are based on the Juan Carlos I design, are the largest...

With her 231-meters length and 26,000 tonnes displacement, Juan Carlos I is the largest vessel the Spanish Navy has ever had. This amphibious assault ship, designed and built entirely in Spain, is one of the biggest naval engineering projects undertaken by CT. Our...

The Martitime Action Vessels (BAM) are four offshore patrol boats belonging to the Spanish Navy that were built by Navantia at its shipyard in San Fernando – Puerto Real; they are based at the Military Arsenal in Las Palmas (Gran Canaria). CT participated in the...

Evrima yacht. Source Ritz Carlton The luxury mini-cruise ship sector is booming, one of the most outstanding examples being the Evrima, constructed at the Barreras Shipyard in Vigo for Ritz Carlton. CT took part in the engineering for this vessel designing...

In accordance with international conventions and regulations, not only existing vessels but also new-built ships must comply with the environmental requirements concerning aquatic ecosystems and the emission of gases into the atmosphere. CT has specialised in this...

We support our customer to create a b2b web-platform and to first sell commercial licenses within 4 months to a enterprise customer. The platform supports corporate department heads as well as their teams in managing their advisors during recurring advisory services...

Image provided by Navantia. The Scorpène Class are a series of attack submarines with diesel-electric propulsion; they were jointly developed by the European naval consortium of the same name, created in 1992 by the French company DCNS and the Spanish company...

A400M French Air Force Ferry Flight ©COPYRIGHT Airbus SAU 2022 Sergio Flores Mango Producciones Since 2013, we have been working side by side with Airbus Defence and Space to develop the service bulletins for the A400M aircraft. These bulletins reflect our commitment...

CT, the leading engineering company in technological innovation throughout the entire product lifecycle, has successfully completed Plug&Play, an R&D project in collaboration with EURECAT Technological Centre, supported by ACCIO through NUCLIS programme. The...

Images provided by Iberdrola Iberdrola is one step away from commissioning the last power plant in the Tâmega complex, the largest project in the energy sector in Portuguese history that has involved the construction of three dams and three power plants (Gouvães,...

LHD “Juan Carlos I. Source BuquesdeGuerra.com With her 231-meters length and 26,000 tonnes displacement, Juan Carlos I is the largest vessel the Spanish Navy has ever had. This amphibious assault ship, designed and built entirely in Spain, is one of the biggest naval...

Since 2012, we have collaborated with Talgo on what is probably the most demanding technological challenge in railway history to date: to provide a fleet of high-speed trains, capable of operating at 300 km/h in the most inhospitable environment on earth. We have been...

The Celebrity Edge is the first state-of-the-art cruise ship in the Edge Class operated by Celebrity Cruises, a subsidiary of the American Royal Caribbean Group. The vessel is 306 metres long, has a beam of 39 metres and can accommodate 2,918 passengers. Part of the...